1. Select project

At the beginning you will see “Project” select list field.

Find and select project you want to configure. You can type any phrase to limit projects values.

After project selection, selected project configuration should appear. If project hasn’t been set earlier by any admin, Default Configuration (see: Default Configuration) will be applied.

If you want to change selected project use “Go to project selection” button available at the bottom of form

You can also just select different project from “Project” select list field.

When switching the project all unsaved changes will be lost!

2. What you can set

Friendly History Configuration app allows you to set:

Entire Statistic Types (i.e. Tab) visibility for project
Restrictions which system groups can see certain Statistic Types

3. Statistic Types visibility

Every Statistic Type has its own toggle that allows to turn ON or turn OFF entire destined Statistic Tab visibility.

Example for Views Tab:

IF CHECKED - Statistic Tab is ON for the project.
IF NOT CHECKED - Statistic Tab is OFF for the project for all users including administrators of any kind.

Check more examples at Configuration Page examples

4. Statistic Types groups restriction

You can restrict Statistic Type visibility based on user groups.

Group restrictions work only if Statistic Type is not turned off completely for project (see chapter: 3. Statistic Types visibility)

Example for Views Tab

If EMPTY - there are NO restriction based on users groups for Statistic Tab in certain project.
In that case all users can see Tab (provided Tab is set as visible in "Show [Statictic Type] Tab" field above).
If NOT EMPTY - only users from listed groups can see Statistic Tab (provided Tab is set as visible in "Show [Statictic Type] Tab" field above).

Check more examples at Configuration Page examples

5. Saving configuration

In order to save all changes use blue “SAVE ALL” button available at the bottom of the form.

As a result you’ll see confirmation as below. Your changes for project have been stored!

6. Restoring Default Configuration

In order to restore Default Configuration (see: Default Configuration) for project use “Set default configuration” button available at the bottom of form.

As a result Default Configuration will be applied to configuration form for selected project.

Remember to save configuration for project after restoring Default Configuration! Otherwise all unsaved changes will be lost!